Hi,
I just need some help. Where can I access the Practice test?
I have got the invoice for my order and the payment went through just can't seem to find where to take the practice test at.

I would like to ask the test participants how many questions were in the exam.

cu

For troubleshooting control plane policing, the current "correct" answer of action "set-clp-transmit" doesn't seem correct.     My research on that command lists

[b]set-clp-transmit [/b]value
Sets the ATM Cell Loss Priority (CLP) bit to 1 on the ATM cell.

I think the correct answer would be to pir for BGP, confirm-action transmit & exceed action transmit ?

Just an FYI. The updated questions just popped into my test app last night, it was about 23 new questions in all. The were spot on for the most part. Now is the time to test before they introduce more new questions. Thanks How2Pass!

EC392 looks like it should be The client database on the original controller is updated with the anchor entry, and the new controller database is updated with the foreign entry.

See https://www.cisco.com/c/en/us/td/docs/wi...rview.html (Intercontroller Layer 3 Roaming)

"Layer 3 roaming is similar to Layer 2 roaming in that the controllers exchange mobility messages on the client roam. However, instead of moving the client database entry to the new controller, the original controller marks the client with an “Anchor” entry in its own client database. The database entry is copied to the new controller client database and marked with a “Foreign” entry in the new controller. The roam remains transparent to the wireless client, and the client maintains its original IP address."

EC490 looks like it should be Implement the destination address for the LSP echo request packet in the 127.x.y.z/8 network

See https://www.cisco.com/c/en/us/td/docs/io...ls-oam.pdf (page 1, MPLS LSP Ping)

Hello needs

When does Vue/Cisco posts test scores?
I was asked to authenticAte and have been waiting for more than 72 hrs

TIA

This site was a huge help. blasted through the test, but studied for a month and went back to the lesson plans to review as well.  wasnt too sure. i completed my last class last year in October and kept putting it off.  But i pulled it off

Well fellow nerds, i took the test today and did not pass. I would say there were at least 16-18 new questions. Also apparently cisco does not show the score. Only percentage of each topic.
So, heres my tip:
Be sure you master all the questions in current H2P. I mean know it so well that you get 100% each and every time.

Questions that i saw:
Eigrp:
Understand feasible and reported distance.
Understand the debug command to indicate why eigrp is not forming.
BGP
Understand route reflector operation.
Meaning the difference between route reflector server vs. client.
Understand how to prevent as advertising and how to prevent it from causing a loop.
Automation.
I dont remember all the detail but it had something to about pushing a python script to the router and router rejected. Options ranged from ip scp server enable to some command i have nevwr seen.
Understand how dhcp works on routers
Multiple new snmp questions.
I will try to remember more and share it.
Right now im going to drink a couple of cold ones and try to forget today.
Good luck with your studies!

Q. Refer to the exhibit. What is the metric of the route to the 192.168.10.33/28 subnet??

needs to be changed to 192.168.10.32/28 to match the OSPF route in the show ip route exhibit

192.168.10.32/28 [110/193]


A. 193