incorrect answers

[legionuk]

Hi
There appears to be several wrong answers

Answer Ec849 appears to be enable AAA overide check for opions
https://www.examtopics.com/discussions/c...iscussion/
Also a Google on AAA overide comes back with dynamic vlans


There is also EC546 for Stackwise.
9 x 9200s can be stacked https://www.cisco.com/c/en/us/products/c...te-en.html
The stackwise cables are proprietary
https://www.cisco.com/c/en/us/products/c...te-en.html


ec793
The answer is wrong.
It should be
"AAA New-Model
AAA authentication login default group RADIUS"

ec686
https://www.examtopics.com/discussions/c...iscussion/
It should not be "On R3" that would prevent all areas from receiving the advertisement
It should be applied to R1 to prevent R3 from receiving the LSA
The diagram should also show area 1 and area 2

Please can these be checked.

[ratedr]

This is concerning. 

Has these questions been looked into or updated?

[forumsupport]

We will look into these questions and fix them if required, within a couple of days.

[forumsupport]

All indicated questions have been updated/fixed. The answer for EC793 was correct but not properly formatted. Ref is added to support correct answer for EC793.

[legionuk]

hi QID:EC787 is also in correct.
The answer should be "It displays the startup config and then termintes the session"
as this is the default behaviour of autocommand.
To prevent it ending the session the following option is required.
autocommand-options nohangup
See https://blog.noblinkyblinky.com/2021/05/...tocommand/

[forumsupport]

EC787 is now fixed, thank you.

[legionuk]

Ec718 the answer should be
Select the PSK under authentication key management
Check
https://www.youtube.com/watch?v=EjNCpxMr1rU

[legionuk]

question EC770 "A network administrator must configure router B to allow traffic only from network 10.100.2.0 to networks outside of router B. Which configuration must be applied?"
It is a radial button selection and your answer is highlighting two different answers...
the correct answer is not displayed in the text it should be

"D. RouterB(config)# access-list 101 permit ip 10.100.2.0 0.0.0.255 any

RouterB(config)# int g0/0/0 -
RouterB(config-if)# ip access-group 101 out

RouterB(config)# int g0/0/1 -
RouterB(config-if)# ip access-group 101 out"

Check https://www.examtopics.com/discussions/c...iscussion/

[forumsupport]

Thank you for your feedback. EC718 and EC770 have been fixed.

[legionuk]

EC688: "which configuration enables a cisco router to send information to a tacacs+ server for individual exec commands associated with privelege level 15"

Correct answer should be
aaa accounting commands 15 default start-stop group tacacs+

https://www.certificationkits.com/cisco-...uring-aaa/

"For every dial-in PPP session, accounting information is sent to the AAA server once the client is authenticated and after the disconnect using the keyword start-stop. So let’s configure the start and stop of the Accounting records.

Router(config)#aaa accounting network default start-stop group radius local"

The current correct answer on how2pass is

aaa authorization commands 15 default group tacacs+

This would authorize the user to have level 15 access, but would not configure accounting information to be sent.