AR092

[pc_evans]

The redistribute command option to match external includes both E1 and E2 Subnets.  The keyword 'external' is converted to 'External 1 and External 2' in the running config.  


IOU2#sh ip route | inc E1 | E2
      E1 - OSPF external type 1, E2 - OSPF external type 2
O E2    4.4.4.0 [110/20] via 192.168.12.1, 00:12:40, Ethernet1/0
O E1    6.6.6.0 [110/40] via 192.168.12.1, 00:13:01, Ethernet1/0
O E1  192.168.56.0/24 [110/40] via 192.168.12.1, 00:35:06, Ethernet1/0
IOU2#
IOU2#
IOU2#show run | section router eigrp
router eigrp 1
network 2.0.0.0
network 192.168.23.0
IOU2#
IOU2#
IOU2#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
IOU2(config)#router eigrp 1
IOU2(config-router)#redistribute ospf 1 match external  metric 10000 2000 255 1 1500 route-map OSPF-TO-EIGRP
IOU2(config-router)#end
IOU2#
IOU2#
IOU2#sh run | section router eigrp
router eigrp 1
network 2.0.0.0
network 192.168.23.0
redistribute ospf 1 match external 1 external 2 metric 10000 2000 255 1 1500 route-map OSPF-TO-EIGRP
IOU2#

######################################################################

IOU3#sh ip route | inc EX
      D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
D EX    4.4.4.0 [170/793600] via 192.168.23.2, 00:07:02, Ethernet0/0
D EX    6.6.6.0 [170/793600] via 192.168.23.2, 00:07:02, Ethernet0/0
IOU3#

[help_desk]

The Answer has been corrected. Thank you!