Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
QID:S19 10x+ still marked incorrect!! HELP!
#1
I cant for the life of me figure out what is going on here.  It has to be either something so simple that was overlooked or the sim is totally bunk!  Unfortunately, the test only says "Incorrect IP address or interface state or passwords" (on both routers)

Cables are definitely correct.

Someone please help, I'm taking the test tomorrow!

thx

Here is my procedure:

login to left router:

conf t
line con 0
password consolepw
login

line vty 0 4
password telnetpw
login

exit

enable secret privpw

int fa0/0
ip address 192.168.142.81 255.255.255.240
no shut

int fa0/1
ip address 192.168.142.30 255.255.255.240
no shut

ctrl^z

copy run start
[ok]

exit

login to right router:

conf t
line con 0
password consolepw
login

line vty 0 4
password telnetpw
login

exit

enable secret privpw

int s0/1
ip address 192.168.142.161 255.255.255.240
no shut

int fa0/0
ip address 192.168.142.78 255.255.255.240
no shut

ctrl^z

copy run start
[ok]

exit
Reply


Messages In This Thread
QID:S19 10x+ still marked incorrect!! HELP! - by BIODTL1997 - 03-30-2010, 06:57 PM
Re: QID:S19 10x+ still marked incorrect!! HELP! - by geteRdone - 04-07-2010, 02:36 PM
Re: QID:S19 10x+ still marked incorrect!! HELP! - by ciscorocks - 04-12-2010, 07:51 PM
Re: QID:S19 10x+ still marked incorrect!! HELP! - by Soulscode - 07-27-2010, 03:58 PM
Re: QID:S19 10x+ still marked incorrect!! HELP! - by elemarmcl - 03-17-2012, 03:49 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)