Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AR 387 BFD Failure Detection Mechanism
#1
BFD Detects path failures between 2 adjacent routers.  A routing protocol failure could be a result of a misconfiguration. 
https://www.cisco.com/c/en/us/td/docs/io...s_bfd.html


BFD is a detection protocol designed to provide fast forwarding path failure detection times for all media types, encapsulations, topologies, and routing protocols. In addition to fast forwarding path failure detection, BFD provides a consistent failure detection method for network administrators. Because the network administrator can use BFD to detect forwarding path failures at a uniform rate, rather than the variable rates for different routing protocol hello mechanisms, network profiling and planning will be easier, and reconvergence time will be consistent and predictable.

https:// www. examguides. com / CCNP-ENARSI/ ccnp-enarsi-cramnotes-4.htm



bfd interval milliseconds min_rx milliseconds multiplier interval-multiplier
https://www.cisco.com/c/en/us/td/docs/io...#wp1053749

The Bidirectional Forwarding Detection (BFD) protocol is a simple hello mechanism that detects failures in a network. Hello packets are sent at a specified, regular interval. A neighbor failure is detected when the routing device stops receiving a reply after a specified interval.

https://www.juniper.net/documentation/us...20interval.
Reply


Messages In This Thread
AR 387 BFD Failure Detection Mechanism - by pc_evans - 02-16-2024, 06:32 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)