Etherchannel and root bridge Sim

[muddytechz]

Starting from the beginning.  Fix PortChannel 1.

conf t
int po 1
switchport trunk encap dot1q
switchport mode trunk

verify by show int trunk

po1 will now show up in trunks .

Now on to actual step to create PO/trunk with SW20.

I created po 11
conf t
int po 11
switchport trunk encap dot1q
switchprot mode trunk

then config interfaces

conf t
int range e 0/0 - 2
switchport trunk encap dot1q
switchport mode trunk
channel-group 11 mode active

All seemed to be working fine after that.  Please let me know if this doesn't look correct for some reason.