10-02-2021, 02:51 AM
Well fellow nerds, i took the test today and did not pass. I would say there were at least 16-18 new questions. Also apparently cisco does not show the score. Only percentage of each topic.
So, heres my tip:
Be sure you master all the questions in current H2P. I mean know it so well that you get 100% each and every time.
Questions that i saw:
Eigrp:
Understand feasible and reported distance.
Understand the debug command to indicate why eigrp is not forming.
BGP
Understand route reflector operation.
Meaning the difference between route reflector server vs. client.
Understand how to prevent as advertising and how to prevent it from causing a loop.
Automation.
I dont remember all the detail but it had something to about pushing a python script to the router and router rejected. Options ranged from ip scp server enable to some command i have nevwr seen.
Understand how dhcp works on routers
Multiple new snmp questions.
I will try to remember more and share it.
Right now im going to drink a couple of cold ones and try to forget today.
Good luck with your studies!
So, heres my tip:
Be sure you master all the questions in current H2P. I mean know it so well that you get 100% each and every time.
Questions that i saw:
Eigrp:
Understand feasible and reported distance.
Understand the debug command to indicate why eigrp is not forming.
BGP
Understand route reflector operation.
Meaning the difference between route reflector server vs. client.
Understand how to prevent as advertising and how to prevent it from causing a loop.
Automation.
I dont remember all the detail but it had something to about pushing a python script to the router and router rejected. Options ranged from ip scp server enable to some command i have nevwr seen.
Understand how dhcp works on routers
Multiple new snmp questions.
I will try to remember more and share it.
Right now im going to drink a couple of cold ones and try to forget today.
Good luck with your studies!