05-03-2011, 07:40 PM
Ok, Just saw the problem.
What they are showing you in the example w/ answers is a portion of the "sh run" command.
so
router eigrp 190
redistribute static
!
ip route 0.0.0.0 0.0.0.0 null 0
The exclamation point (!) signifies a separation in commands that have been entered.
So they are showing that in order to obtain the desired outcome of the question the Administrator needs to add the redistribute static command under the EIGRP process and he will also need to do a default route entry "ip route 0.0.0.0 0.0.0.0 e0/0" (or some such entry).
So my guess is one of two things
1) a type-o
2) a correct entry meant to throw you off.
Because once you enter an "ip route ...." command, then a route is placed into the routing table going to null0
What they are showing you in the example w/ answers is a portion of the "sh run" command.
so
router eigrp 190
redistribute static
!
ip route 0.0.0.0 0.0.0.0 null 0
The exclamation point (!) signifies a separation in commands that have been entered.
So they are showing that in order to obtain the desired outcome of the question the Administrator needs to add the redistribute static command under the EIGRP process and he will also need to do a default route entry "ip route 0.0.0.0 0.0.0.0 e0/0" (or some such entry).
So my guess is one of two things
1) a type-o
2) a correct entry meant to throw you off.
Because once you enter an "ip route ...." command, then a route is placed into the routing table going to null0