03-10-2024, 05:57 PM
There is no need for a flow exporter on R1. The problem is that the netflow collector cannot receive flows from R1.
only making changes to R3, the secondary link is not the correct choice.
R1 Flow exporter shows the traffic destined to 10.60.66.66 port 1090, the actual IP address of the collector is 10.66.66.66. This needs to be corrected.
The other problem is that R4 is the primary link and has an ACL blocking udp 1090.
only making changes to R3, the secondary link is not the correct choice.
R1 Flow exporter shows the traffic destined to 10.60.66.66 port 1090, the actual IP address of the collector is 10.66.66.66. This needs to be corrected.
The other problem is that R4 is the primary link and has an ACL blocking udp 1090.