12-30-2023, 06:33 PM
Either of these answers will work depending on which switch the configurations are applied.
[*]Configure channel-group 1 mode desirable on both interfaces.
[*]Configure channel-group 1 mode active on both interfaces.
[*]configuring both interfaces of switch3 for PAgP (desirable) would work
[*]configuring both interfaces of switch2 for LACP (active) would work
[*]Configure channel-group 1 mode desirable on both interfaces.
[*]Configure channel-group 1 mode active on both interfaces.
[*]configuring both interfaces of switch3 for PAgP (desirable) would work
[*]configuring both interfaces of switch2 for LACP (active) would work